OPERATION:
1. START UP ULTRASONIC FUNCTION:
1.Fill stainless steel tank with water
2.Plug the cleaner into grounded outlet;
3.
Press the “
TIME+
”key for setting 0-30 min working time. Press the
“
TIME-
” key for reduce the time continuous. Press “Ultrasonic” button
to “
ON
”, the cleaner will start working. During working, you will hear
the “ sizzling” voice ,that means the cleaner running properly. (Do not
run the cleaner continuously more than one hour at one time)
4.When the right knob will be Rotating around
,
you can adjust to the
power.
2. START UP HEATING FUNCTION:
1.Set temperature( if need) : Press the
“
TEMP +
” key for setting
temperature 0°C-
80°C. Press the “
TEMP -
”key for reduce
temperature.
2.
Then press the “Heating” button to “
ON
” begin to heat.
3. STOP ULTRASONIC PROCESS:
1.Press the
“Ultrasonic” button to “
OFF
”, the cleaner will stops
working, indicator light turn off. And then disconnect the power
supply.
2.Press the
“Heating” button to “
OFF
”, the heating function will stop.
3.Empty the tank and clean both the outside and inside of the
cleaner with clean and dry cloth for next use.
Note
:
⊿
Always unplug and empty the cleaner after using.
⊿
Remove the contaminants with moist cloth and water for the tank.
⊿
Wipe the covering with dry towel.