29
BLOWER REMOVAL
This furnace has a blower sealing system, which is designed to be tight and rattle free. Refer
to the instructions and pictures below.
1) Shut off oil and power to furnace.
2) Remove the two (2) screws securing
the blower door (Figure 1).
3) Open blower compartment (Figure
2).
4) Disconnect the wiring to the blower
motor.
5) Remove the screw securing the
blower side to the separating panel
(Figure 3).
6) Slide the blower toward you and get
the blower out of the furnace
(Figure 4).
Figure 3
Figure 4
Figure 1 Figure 2
