24
Step
Possible Cause
Check-out procedure
Corrective action
No Heat
5
Riello burner
Check for 120 Volts on
the black wire, contact
(COM) on the burner
activation relay
Check if oil primary
control is on reset
Check for continuity
between the two wires
yellow and violet on
the burner activation
relay
Check for 120 Volts on
the contact (No) of the
burner activation relay
Check for 120 volts on the
orange wire coming to the
burner (L)
Yes - Move to next step
No - Back to step # 4 or check for
bad connection
Yes - Press reset button
No - Move to the next step
Yes - Move to next step
No - Change the electronic fan control
Yes - Move to next step
No - Change the burner activation relay
Yes - Failure on the burner
No - Change the electronic fan control
Beckett Burner
Check for 120 Volts on
terminal strip (COM) of the
burner activation relay
Check if oil primary control
is on Reset and by-pass
on (TT)
Check for continuity
between the two wires
yellow and violet on
the burner activation
relay
Check for 120 Volts on the
contact (NO) on the burner
activation relay
Check for 120 Volts on the
orange wire coming to the
burner
Yes - Move to next step
No - Back to step # 4 or check bad
connection
Yes - Press reset button, check
by- pass on (TT)
No - Move to the next step
Yes - Move to next step
No - Change the electronic fan control
Yes - Move to next step
No - Change the burner activation relay
Yes - Failure on the burner
No - Change the primary control
Summary of Contents for KLF-100
