background image

Voice Broadband Optical Multiplexer 

User 

Manual 

 

16 

5.3 Warranty Card 

The Company guarantees: 

1.      Maintenance Service 

(1)        Within the free-of-charge warranty period (12 months 

from  the  date  of  purchase), the Company  will  replace  or  repair 
any damaged components free of charge, should the device fail 
under  normal  operation  circumstances  recognized  by  the 
Company. 

(2)            Within  the  charged  warranty  period  (24  months 

from  the  date  on  which  the  free-of-charge  warranty  period 
expires),  the  Company  will  charge  for  the  replacement 
component, yet continue  to provide free-of-charge  maintenance 
service,  should  the  device  fail  under  normal  operation 
circumstances recognized by the Company. 
 

2.      The  warranty  does  not  cover  the  follows,  in  which  replacement 
components and maintenance services will be charged accordingly. 

(3)    After 36 months from the date of purchase; 
(4)    The  user  fails  to  provide  the  certificate  of  purchase 

date, or the serial number of the product indicates that 
the product has left the factory 36 months ago. 

  (5)    Include,  but  not  limited  to,  damages  resulting  from 

abnormal  operating  conditions  such  as  violent 
collision, squeezing, falling, and liquid intrusion. 

(6)    The frangibility label is damaged. 
(7)    Unauthorized disassembling of the product by the 

User. 

(8)    Damage from force majeure such as earthquake, flood 

and lightening strike. 

3.  The  Company  will  repair  the  replacement  components  free  of  charge 
within a period of 12 months starting from the date of replacement. 
 
4.  The  User  may  choose  to  send  the  product  back  to  the  Company  for 
maintenance or deliver the product to maintenance service agencies of the 
Company throughout the country. 
 
5.      The Company shall not be held liable for damages arising from any 
improper  operation.  The  Company  will  assume  liabilities  not  exceeding 
the price of the product  for any direct  or indirect  damages, including  but 

Summary of Contents for OP-4E1+ETH+32Vo


















Reviews: