11
6
Install Ignitor Batteries
Unscrew Ignitor Cap from Control Panel.
Place supplied AA battery into the Ignitor
Slot with positive pole facing you.
Position the Cap and Spring over the AA
battery and tighten onto Control Panel.
Repeat to install the other AA battery
into the Ignitor Slot.
WARNING
!
Failure to read and follow the Use and Care
Instructions could result in a fire or explosion
that could cause serious bodily injury, death or
property damage.
!
Install Cooking Components
Place the Savor Plates
on lower ledge
above Burners.
Place Cooking Grids on bowl ledge.
With the assistance of another person,
perform this Electrode Check before
proceeding.
This test will ensure that the Spark Electrode
Tips are properly positioned so your grill lights
easily and properly.
Be sure all Control Knobs are set to
"OFF" and open the Grill Lids.
Have your assistant stand behind to the
right of the grill and look toward the front
of the grill bowl.
Never
put your face
inside the Grill Head.
Press the Ignitor Cap. You should hear
a "clicking" sound. Your assistant should
see a blue spark within each Gas
Collector Box. If a spark is present the
Electrode Tips are properly positioned.
If no spark is seen, the Spark Gap
needs to be adjusted as follows:
•
•
•
Using an adjustable wrench, loosen the
Inside Nut until the Gas Collector Box
can be turned upward.
If the gap between the Spark Electrode
Tip and Receiver is more than 3/16"
use long nose pliers to gently squeeze
the Gas Collector Box to narrow gap.
Return the Gas Collector Box to its
original position, secure the Inside Nut
and try the Electrode Check again. If no
"clicking" sound is heard:
AA Battery is installed backwards.
Electric wires may be loose. Remove
the AA Battery and inspect the Ignitor
Junction Box found behind the Control
Panel and reconnect any loose wires.
8
7
Final Grill Assembly Step
When you have finished assembling your
grill be sure that all screws are tightened
for safe operation of your grill.
®
-
-
Call the Grill Information Center
if you have any problem with this product. We can help you with
questions about assembly and grill operation or if there are damaged or missing parts when you unpack
this unit from the shipping box. Please call before returning this product.
GRILL INFORMATION CENTER
Call 8am to 4:30pm CST
1-800-761-5456
Monday through Friday
Spark Electrode Tip
Spark Gap
Spark Receiver
Gas Collector Box
Inside Nut
Spring
+
-
AA Battery
Ignitor Cap
Ignitor Slot
Cooking Grids
Savor Plate
®
