Page 6 of 6
Symptom
Causes
Action
Battery icon on LCD on
transmitter.
Low Battery
Replace batteries.
LCD Display is blank
Low Battery
Check battery installation and replace
batteries.
Receiver emits the beep in
every minute
Low Battery
Replace batteries.
Appliance does not come
on.
1. DIP (Privacy) switch setting on
transmitter does not match receiver
1. Make sure the transmitter is matched to
the receiver.
2. Transmitter measures temperature
exceeding 99 degrees and shows
“HI” on LCD display.
2. Move transmitter to a cooler place and
wait until temperature drops below 99
degrees.
3. Distance between the transmitter
and receiver is more than 30 feet
3. Make sure the operating distance is less
than 30 feet
Receiver cannot receive
signal.
1.Receiver is installed in an enclosure
1. Make sure the receiver is not inside a
tight enclosure.
