10
POWER
To control this appliance turn on/off. To turn OFF the appliance, touch the mark and
hold for 5 seconds.
LIGHT
To control the inner light turn on/off.
UP
Used to raise (warm) the set temperature by 1°C or 1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C or 1ºF.
Setting the Temperature Control
You can set the temperature as required by touching the UP or DOWN
mark. When you touch the two marks for the first time, the LED readout
will show the original temperature set previously (the temperature preset at
the factory is 12°C).
The temperature will increase 1°C if you touch the UP mark once, or the
temperature will decrease 1°C if you touch the DOWN mark once.
To view the “set” temperature at any time, touch the UP or DOWN mark, the
“set” temperature will temporarily “flash” in the LED display for 5 seconds.
The wine cooler has two temperature zones. The temperature settings of BOTH ZONE
are adjustable with the range 5º-18ºC/40º- 64ºF. It is recommended to set to 13º ~
18ºC / 55 ~ 65ºF which is ideal for storing white and red wines and to 5º ~13ºC / 40 ~
55ºF which is ideal for storing sparkling and white wines.
The temperature that you desire to set will increase 1ºF or 1ºC if you touch the
UP
Summary of Contents for 36D
Page 1: ...36D Instruction Manual ...