7
Built-in Cabinet Instructions
These units are designed for built-in or
free standing installation. If you plan to
use this unit in a built-in application please follow the requirements shown to the
below:
ATTENTION:
Store wine in sealed bottles.
Do not overload the cabinet.
Do not open the door unless necessary.
Do not cover shelves with aluminum foil or any other shelf material
which may prevent air circulation.
Should the wine cooler be left empty for long periods it is suggested that the
appliance is unplugged, and after careful cleaning, leave the door ajar to allow air
to circulate inside the cabinet in order to avoid possible condensation, mold or
odors forming.
Installing the Handle
1.
Remove the door gasket on the side you wish to
install the handle - you can see two designated
holes for handle installation.
2.
Install the handle tightly as shown above with
two screws, lock washers and flat washers
provided.
3.
Replace the door gasket.
Depth
57cm
Height
87cm
Summary of Contents for 36D
Page 1: ...36D Instruction Manual ...