background image

 

 

IMPORTANT SAFETY INFORMATION                                                         

               

Before using the appliance, please properly position and install it as described in this manual. To avoid the 

risk of fire, electrical shock or injury when using the appliance, please follow these basic precautions: 
• The appliance is intended to be used exclusively for the storage of wine.       
•  Make sure the voltage/current marked on the rating label corresponds with your supply voltage. Plug into a 

standard 10amp 3-pin outlet. 

• It is recommended that a separate circuit, serving only your appliance be provided.   
•  Never clean the appliance parts with flammable fluids which may create a fire hazard or explosion. And do 

not store or use gasoline or other flammable vapours and liquids in the vicinity of the appliance. 

• Do not connect or disconnect the electric plug when your hands are wet. 
•  Unplug the appliance or disconnect power before cleaning, maintenance or servicing. Failure to do so can 

result in electrical shock or death. 

•  Do not attempt to repair or replace any part of the appliance unless it is specifically recommended in this 

material. All other servicing should be referred to a qualified service technician. 

• To ensure proper ventilation for the appliance, the front of the unit must be completely unobstructed. Locate 

the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). 

• The fuse (or circuit breaker) size should be 10 amp or higher. 
•  It is important for the appliance to be leveled in order to work properly. You may adjust the appliance’s feet 

to level it. 

•  This  appliance  is  intended  for  use  by  persons  with  sufficient  experience  and  knowledge  of  electrical 

appliances.    Any other persons (including children) should be supervised or  given instruction concerning 

use of the appliance by a person responsible for their safety.   

• Children should be supervised to ensure that they do not play with the appliance.   
•  Do  not  use  solvent-based  cleaning  agents  of  abrasives  on  the  interior.  These  cleaners may  damage  or 

discolor the interior. 

• Do not use this appliance for other than its intended purpose. 
• The use of attachments not recommended by the manufacturer may be hazardous.     
•  When you dispose the appliance, take off the door and leave the shelves in place so that children may not 

easily climb inside. And make sure the coolant circuit, particularly the heat exchanger at the back/bottom of 

the unit not be damaged. The          symbol on the product or its packaging indicates that this product is not 

to be handled as normal household waste and it is to be taken to a recycling collection point for electrical 

and electronic goods.   

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for GC46D
















Reviews: