O P E R A T I O N
Transmitter Box
1
2
3
4
5
Battery Power Switch: (Power On/Off)
USB Port (Supports USB 2.0 high speed cable).
LED Indicator Light
ID button: Press this button together with right knob
on Totum to start pairing process.
Line-in jack: Direct line in playback via 3.5mm audio
jack.
1.
2.
3.
4.
5.
If the Light is ON: Audio is transmitting normally.
If the Light is slowly flashing: No audio source found.
If the Light is rapidly flashing: Pairing is in progress.
•
•
•
Key/Socket Functions for Transmitter Box:
Diagram for Player System
If No Sound, Intermittent Sound or Weak Sound is Coming Out
of the Speakers :
For Transmitter Connected to Music Player:
Check the Transmitter to see if the batteries need to be changed,
or if the batteries are installed correctly. Adjust or change the
batteries as needed.
Check the Battery Power Switch to see if it is turned on. Turn
Battery Power Switch ON if it is in OFF position.
Make sure the Transmitter Wire is plugged into the Transmitter and
Music Player. Plug both ends of the Transmitter Wire so that they
are securely in the direct line in jacks of the Transmitter and Music
Player.
Check to see if the Music Player is on and playing music. Make
sure the Music Player is on PLAY and adjust the sound level of
the Music Player if there is no volume.
Check the MP3 if it is high-power and high-quality if you use
a MP3 as a music source.
•
•
•
•
•
For Transmitter Connected to Computer:
Check if the USB Connection Wire is connected to the USB ports
of the Transmitter and Computer. Reconnect the USB Connections
into the USB ports of the Transmitter and Computer if they are
unplugged.
Make sure that the Transmitter Wire is not plugged into the direct
line jack (this can interfere with the playback of the Music Source).
Unplug the Transmitter Wire from the Direct Line jack if it is
connected.
Make sure your computer is on and playing music. If your computer
is not playing music, make sure that a audio file is selected and set
to PLAY on your computer.
Check your computer to see if the sound level is too low or on mute.
If the sound level is low or on mute, adjust the sound level on your
computer.
•
•
•
•
Make sure the Transmitter and Totum are Paired:
Make sure the Transmitter and music source are connected and
turned ON. Make sure the music source is set to PLAY. Push the
right knob on Totum for about 1-3 seconds. Pairing will occur for
20 seconds. If pairing is successful this should automatically start
the Music and Lights System. If automatic pairing does not work,
refer to page 8 for manual pairing instructions.
•
If you have checked for everything in the previous points and no
sound, intermittent sound or weak sound is coming from the
speakers, check to see if there are any obstacles between the Heater
and Transmitter. Remove any obstacles or reposition the Heater or
Transmitter so they are not blocked.
Make sure the Heater and Transmitter are within 82 feet (25m) of
each other.
Make sure there are no obstacles between the Heater and
Transmitter
•
•
EN
9
amp
Main control
+ Led Drv
+ 2.4G RX
Light
Bar
AC Adapter
220vac
Knob
Audio
Audio
amp
Transmitter
3.5mm
