GB-4
GB-3
ENGLISH
ENGLISH
Image Persistence
product is not designed to have a
image patterns on the screen for extended
periods of time.
"bolt of lightning" indicates uninsulated material within your
unit may cause an electrical shock. For the safety of everyone in your
household, please do not remove product covering.
“exclamation point" calls attention to features for which you
should read the enclosed literature closely to prevent operating and
maintenance problems.
WARNING:
To reduce the risk of or electric shock, this apparatus should not
be exposed to rain or moisture and objects
with liquids, such as vases, should
not be placed on this apparatus.
RISK Of ELECTRIC SHOCK
DO WOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Power
set operates on an AC mains supply, the voltage is as indicated on the label on
the back cover. In the event of thunderstorms or power cuts, please pull out the aerial
and mains plugs.
If the electric cable is damaged, it must be replaced by the manufacturer, or by the
persons, in order to avoid a danger.
Warning
To prevent or shock hazard, do not expose the set to rain or moisture. Do not rub
or strike the LCD with anything as this may scratch, mark, or damage the Active
LCD permanently.
Caution
Do not attempt to repair, disassemble or modify this product yourself as opening or
removing covers may expose you to the risk of electric shock or other hazards.
are no user-serviceable parts inside.
Repairs should only be performed by
personnel.
Antenna
appliance should be connected to an antenna.
1. Unplug the power cord from the mains outlet before connecting or disconnecting
the antenna.
2. If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection against
voltage surges and buildup static charges.
3. Connect the RF Coaxial Antenna Cable (75 ohm) (not included) to the socket
marked with ATV / DTV Tuner on the rear panel of unit.
4. Connect the antenna cable to the wall antenna socket or jack.
5. For optimum picture quality, adjust the external antenna direction if needed or seek
advice from your local antenna installation expert.
INSTALLATION
Summary of Contents for LSV16A5
Page 1: ...LSV16A5...
