4.8
Before you attach the 609 you will need to
loosen the ML01 (nut) attached to the L08C-X
tops. Note: Loosen nuts on only one side at a
time, i.e. right front corner, right rear corner.
See .
With 2 people proceed to install 609 in
this order, note that 609 must be installed
with groove side down see .
1. With one person holding the 609 level and in
position have the other person attach the 609
to the 601B using S04/ML01 (nut and bolt).
See .
2. Now move the loosened S04/ML01 (nut and
bolt) currently attached to the 601A upward to
firmly secure the L08C-X, 609 and 601A
together as shown in .
3. Repeat steps 1 and 2 for the other end of 609.
4. With one side firmly secured move to the
other side and repeat steps 1, 2 and 3.
MIDDLE ASSEMBLY CONTINUED
L08D OR
L08B
L08C-X
601A
609
L08C-X
GRANDIO
T I P
Remove only one L08C-X
at a time. If all L08C-X’s
are removed, the structure will collapse
and cause unwarrantable damage.
601B
609
S04/ML01
L08C-X
L08D OR
L08B
LOOSEN
ML01
21
STEP F
OUR
Inside View
Inside View
609
Profile View
Groove
