W05
Base
602A
602A
L08C-X
S04
W05 CLIP
L08C
MIDDLE ASSEMBLY CONTINUED
4.9
Before you attach the 602A’s to the sides
of the greenhouse you will need to loosen the
ML01 (nut) attached to the L08C-X and L08C
located at the base. Once the bottom of
L08C-X’s are loosened on one side attach the
602A’s to the sides of the greenhouse in this
order.
1. Hold the 602A in place as shown and attach
the top of the 602A to the 609 using
S04/ML01 (nut and bolt). As shown in .
2. Now attach the bottom of 602A to the L08C
and base using a S04/ML01 (nut and bolt) and
W05 (base clip) as shown in . Note: Where
the L08C-X reattaches to the L08C and the
602A be sure to secure them with a W05 (base
clip) to the base as shown in .
3. Repeat for the other side.
602A
609
L08C-X
L08C
609
602A
Inside View
Inside View
Inside View
22
STEP F
OUR
L08C
