*
If using the moisture control kit with anti dust tape you
will apply it now following the kits directions.
2.1
Pre thread W08 and W02 fasteners with S05 for ease
of installation, only turn a few times. See .
2.2
Use W08 bracket to attach the (2) 601B’s secure
parts with the S05 fasteners provided as shown in .
Screw heads will remain outside channel.
2.3
Insert Y3-1 window panel as shown in .
2.4
Attach 603A with W02-T and S04/ML01
fasteners as shown in .
Inside View
W08
601B
601B
S05
IMPORTANT: Use only S05 Screws, other screws may damage frame.
FRONT FRAME ASSEMBLY CONTINUED
ALWAYS ASSEMBLE FRONT HORIZONTAL
Inside View
Y3-1
601B
601B
603A
W08
W02-T
W02-T
W02
W02
W02-T
601B
603A
Y3-1
W02
W02
W08
FAT
END
FAT
END
Fat End on the W02’s will always face downward.
Transparent Clear Film
Opal White Film
Polycarbonate
Panels
Sun
The UV-Protected side is covered with clear film and must face
toward the sun. The side covered in white film will always face
the interior of the greenhouse. We suggest you peel all film off
completely prior to assembly and use a permanent marker to
place a small “X” on the lower right corner of each panel on the
clear side that faces the sun, each panel has a sticker labeling
the panel number and this side always faces the sun or
outward as well. DO NOT REMOVE LABELS UNTIL YOU
INSTALL PANELS. The “X” is suggested in case you
dis-assemble your greenhouse in the future so you may
identify which side has the UV coating. Always use gloves when
handling the polycarbonate panels as the edges can be very
sharp.
IMPORTANT: POLYCARBONATE PANELS
22
Summary of Contents for Grandio Element 6x4 with Base Kit
Page 67: ...NOTES NOTES...
