2nd EXTENSION ASSEMBLY INSTRUCTIONS
CONTINUE FOR 8X16 ONLY / FOR 8X12 SKIP AHEAD TO PAGE 51 OR STEP 5.19
5.10
See images below at how the 609’s should assemble, you will combine (1) 609 from one 4X Box and (1) 609 from the
4X-Middle Box. We hope all will be labeled but some may not say Middle or M on them. Sorry for this inconvenience. Note that
the Middle 609’s have holes drilled on both ends, where the 609’s that will be at the back will have only one end with drilled
holes to connect with the 609-XS. Note that will attach to the currently installed 8 foot section of 609’s with the 609-XS. You
will repeat this process 4 times.
Pay special attention to the orientation of the 609, make sure the correct side faces down, see . Note that no notches should
be right next to each other see . We recommend you lay out the parts as shown then see 5.11 for assembly instructions.
BACK
BACK
FRONT
FRONT
Note orientation of the 609’s is from
the perspective of looking at the
greenhouse from the front door to the
back wall from the outside.
RIGHT SIDE OF GREENHOUSE
609
Profile View
Groove
UP
LEFT SIDE OF GREENHOUSE
41
STEP FIVE
Summary of Contents for GRANDIO ELITE 8x12 2015
Page 71: ...NOTES NOTES 70 NOTES...
