5.17
Before you attach the 602A’s to the sides
of the greenhouse you will need to loosen the
ML01 (nut) attached to the L08C-X and the
base. See diagram . Remove and set aside
the L08D-X supports.
1. Once the bottom of one L08C-X is loosened
set the 602A onto the bolt of the L08C-X. Be
sure the 602A is aligned and sitting flush on top
of the base kit. See for reference.
2. Hold the 602A in place and attach the top of
the 602A to the 609 using S04/ML01 (nut
and bolt). As shown in .
3. Repeat steps 1. and 2. on all four corners
where the L08C-X ‘s meet the base kit.
4. Now attach the bottom of 602A to the
Base using a S04/ML01 (nut and bolt) as
shown in , and to the 609 with an
S04/ML01 combo as is shown in .
5. Repeat step 4. on all places where a
602A should go. You may reference
diagrams at front for your exact size.
Note: Where the L08C-X reattaches to the
BASE and the 602A be sure to secure
them tightly see .
L08C-X
602A
L08C-X
S04
ML01
BASE
Inside View
609
602A
Inside View
BA-S2
602A
Inside View
ML01/S04
ML01/S04
L08C-X
45
STEP FIVE
MIDDLE ASSEMBLY INSTRUCTIONS CONTINUED
L08D-X
L08D-X
602A
602A
602A
602A
602A
Loosen only one L08C-X at a time.
Slide L08C-X
into place
L08C-X
Summary of Contents for GRANDIO ELITE 8x12 2015
Page 71: ...NOTES NOTES 70 NOTES...
