Skype BCP and GXE5024 Web Interfaces (Figure 7-1)
3. To set a limit on the number of calls allowed through this trunk, please set the “Max Concurrent
Calls Allowed” field to the limit allowed by Skype provider, or a lower number if you wish.
4. If desired set the “Dial Prefix” to a number users will use to make outbound calls with this trunk. This
rule will be added automatically to the “General Outbound” Call Routing Profile and can be modified
later.
5. “General Inbound” is chosen as the default Call Routing Profile and we recommend you to keep it
that way unless you are sure about applying these modifications. The Call Routing Profile assigned to
a trunk will determine what will happen when a call comes into the trunk. The Selected List should
only include one profile.
Call Routing in GXE502X
Inbound Calls.
GXE Call Routing capabilities allow the administrator to decide where the call will be
routed and/or any additional conditions that may impact the routing of the call. For example the
organization may want all of the calls to be answered by an Auto-Attendant or a Ring a Group. At the
same time specific conditions can be added depending on the Caller Party CLI Number (Caller Line
Identification), DID and any specific date, weekday or time of the day.
