GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 37 of 48
Connection Request
Port
The port for the ACS to connect to the phone.
CPE SSL Certificate
The Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private Key
The Cert Key for the phone to connect to the ACS via SSL.
Maintenance ->Security
Configuration via
Keypad Menu
Configures the access control for the users to configure from keypad Menu.
There are three different options:
Unrestricted.
All the options can be accessed in keypad Menu.
Basic settings only
. The CONFIG option will not be available in
LCDMenu.
Constraint
Mode.
CONFIG,
FACTORY
FUNCTIONS
and
NETWORKoptions will not be available in LCD menu.
Enable STAR key
Keypad locking
If set to "Yes", the keypad can be locked by pressing and holding the STAR *
key for about 4 seconds. A lock icon will show indicating the keypad is locked.
The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR * key
for about 4 seconds and then enter the password to unlock it. If the Star Key
Lock is enabled without specifying password, user can press and hold the
STAR * key for 4 seconds and press OK to unlock the phone.
Password to lock/unlock
Configures the password to lock/unlock the keypad. The password field allows
number with up to 32 characters.
SIP TLS Certificate
SSL Certificate used for SIP TLS Transport.
SIPTLS Private Key
SSL Private key used for SIP TLS Transport.
SIPTLS Private Key
Password
SSL Private key password used for SIP TLS Transport.
Web Access Mode
Sets the protocol for web interface as HTTP or HTTPS. Default setting is
HTTP.
Disable SSH
Disable SSH access. SSH is enabled by default.
Web/Keypad/Restrict
mode Lockout Duration
Specifies the time in minutes that the web or LCD login interface will be
locked out to user after five login failures. This logout time is used for web
login, STAR keypad unlock and LCD restrict mode admin login. Range is 0-60
minutes.
PHONEBOOK PAGE DEFINITIONS
Phonebook -> Contacts
Add Contact
Specify Contact’s First Name, Last Name, Phone Number, Accounts and
Groups to add one new contact in phonebook.
Phonebook ->Group Management
Add Group
Adds new groups. User can also edit and delete existing groups on this page.
Phonebook -> Phonebook Management
Enable Phonebook XML
Download
Configures to enable phonebook XML download. Users could select
HTTP/HTTPS/TFTP to download the phonebook file. The default setting is
"Disabled".
Phonebook XML Server
Path
Configures the server path to download the phonebook XML. This field could
be IP address or URL, with up to 256 characters.
Phonebook Download
Configures the phonebook download interval (in minutes). If it's set to 0, the
