background image

 

FIRMWARE 1.0.3.4 

GXW4248 USER MANUAL 

PAGE 34 OF 54  

 

 

 

 

Connection 

Request 

Password 

The password for the TR-069 Auto Configuration Server to connect to the phone. 

Security Settings 

SIP TLS 

Certificate 

The GXW4248 supports SIP over TLS. It has built-in private key and SSL  

certificate. The user specified SSL certificate used for SIP over TLS is in X.509 format. 

SIP TLS Private 

Key 

You may also customize the SIP TLS  Private Key. The user specified SIP TLS  private key 

used for SIP over TLS is in X.509 format. 

SIP TLS Private 

Key Password 

SSL Private key password used for SIP Transport in TLS/TCP. 

Primary RADIUS 

Server 

Remote Authentication Dial In User Service (RADIUS). GXW4248  supports RADIUS for 

authentication, authorization and billing purposes. Primary and secondary RADIUS server 

configurations are available to provide redundancy to this feature. In case Primary Radius 

server becomes unusable, RADIUS requests will be automatically sent to the secondary 

server. When at least one RADUIS server was configured, the device will allow users to make 

phone calls only after authorization from RADIUS server has been received. CDR (Call Detail 

Record) is also sent to the RADIUS server for billing purposes. RAIDUS server can send 

requests to terminate calls when run out of pre-paid credit. 

Primary RADIUS 

Authentication 

Port 

Default is 1812. Specifies the port to be used for the Primary RADIUS Authentication. 

Primary RADIUS 

Account Port 

Default is 1813. Specifies the port to be used for the Primary RADIUS Account. 

Primary RADIUS 

Server Secret 

Specifies the secret string to be used to authenticate the RADIUS connection to the Primary 

Server. It should match RADIUS configuration. 

Secondary 

RADIUS Server 

Set the IP or FQDN of the Secondary RADIUS Server. In case Primary Radius server 

becomes unusable, secondary will take role of primary and will manage credit recourses in the 

network 

Secondary 

RADIUS 

Authentication 

Port 

Default is 1812. Specifies the port to be used for the Secondary RADIUS Authentication. 

Summary of Contents for GXW4248























































Reviews: