P a g e
|
19
HT801 Administration Guide
Web Configuration Pages Definitions
This section describes the options in the HT801 Web UI. As mentioned, you can log in as an administrator
or an end user.
Status:
Displays the system info, network status, account status, and line options.
Basic Settings:
Configures the end user level password, IP address modes, web access, time zone
settings and language.
Advanced Settings:
Configures networks, upgrading and provisioning, TR-069, security settings,
date and time, syslog, audio settings, call settings and call progress tones.
FXS Port:
Configures SIP settings, SIP registration, accounts settings, NAT settings, call features,
ring tones.
Status Page Definitions
Table 6: Status Page Definitions
Account Status
MAC Address
Shows device ID in hexadecimal format. This is needed by network administrators for
troubleshooting. The MAC address will be used for provisioning and can be found on
the label on original box and on the label located on the bottom panel of the device.
IP Address
Displays assigned IP address. Example: 192.168.5.110.
Product Model
Displays product model info. Default is
HT801
.
Hardware Version
Displays the hardware revision information and the part number.
Software version
Program:
Specifies Program version. Current is 0.1.3.2 This is the main firmware
release number, which is always used for identifying the software system of the
HT801.
Bootloader:
Specifies Boot version. Current is 1.0.3.2
Core:
Specifies Core version. Current is 1.0.3.2
Base:
Specifies Base version. Current is 1.0.3.2
CPE:
Specifies CPE version. CPE version is displayed only when HT801 is
connected to an ACS using TR-069 protocol.
Software Status
Indicates actual software status.
System Up Time
Indicates actual system time and uptime since last reboot.
PPPoE Link Up
Indicates PPPoE connection status.
NAT
Indicates type of NAT when it’s configured.
