2
9
Ignoring the safety warnings may
lead to injuries and/or damaging
the product.
Refrain from hanging anything on the
screen as it may cause the screen to
fall.
Do not connect any electrical
attachments or remote controls.
Fixtures should be installed in a secure
place to avoid accidents or the screen
falling.
Roll up the screen after every use.
Leaving it hanging for a long period
of time may cause the fabric to loosen.
Please contact your local dealer for
repairs or maintenance. Please contact
our company if you have any further
questions. Avoid taking apart the
fixtures yourself. Loose parts may
cause the screen to fall.
Warnings
Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer.
Product specifications are subject to change.
The ceiling or wall used for fixture installation must be secure to prevent the screens from falling.
While installing electrical motors, please hire professionals or your local dealer to ensure safety. A misconnection
may lead to fire or leaks.
Make sure the Fixing screw be fastened when using the wall bracket, to avoid any damage.
Keep all infrared wireless products away from fluorescent lighting as it may cause malfunctions.
Please read the following as any damage to the screen surface will affect the quality of the picture:
1.Avoid contact or touching the screen surface as it may cause scratches or tears.
2.Do not write or draw on the surface.
3.Clean the screen with a soft cloth and lukewarm water. Do not use any detergent or cleaning products.
Roll up the screen after every use. Ensure that the screen is level when installing; do not pull on the sides or fold
the screen.
To prevent unnecessary damage, the operating and maintenance of the screen should be done by adults.
Installation
Figure 1
Wood wall installation
Wood ceiling installation
Concrete wall installation
Concrete ceiling installation
Figure 2
Figure 3
Figure 4
Figure 5
Wall and Ceiling Mount Installation
Installation Steps:
1.Wood wall and ceiling installation: Drill in the 5 x 40 screws through the appropriate holes in the bracket
(figure 2-3)
2.Drywall and ceiling installation: Install the anchors and drill in the 5 x 40 screws into the appropriate
bracket holes (figure 4-5)
Take out all the parts from the package and following the accessories guideline ensure all the parts are there.
There are three different types of installation available for this product: wall mount, ceiling mount or ceiling hang.
Depending on the installation environment, the floating mounting brackets can be installed at various points for your
convenience. However, the ideal position for the mounting brackets is closer to the endcap as this will reduce
vibration and noise.
1.According to the surface of installation, choose the appropriate screws needed for mounting (regular screws for
wood surfaces, tapping screws for concrete surfaces)
2.Mount the brackets onto the surface, ensuring it is level (tip: draw a erasable level line when mounting the
brackets). See below for picture description (figure 1):
