9
2
1.
-
Unpack and extend frame on a flat surface
( Figure 3 4 ).
This projection screen should be installed at the
best possible viewing position for the audience.
Front projection ( Figure 1 ) and Rear projection
( Figure 2 ). Install according to material chosen.
Installation
Figure
4
Figure
3
Figure
2
Figure
1
Please read the following as any damage to the screen surface will affect the quality of the picture:
1.Avoid contact or touching the screen surface as it may cause scratches or tears.
2.Do not write or draw on the surface
3.Clean the screen with a soft cloth and lukewarm water. Do not use any detergent or cleaning products.
To avoid injury, two people are necessary for both assembly and storage.
Please use in a location shielded from the elements, especially wind. A strong wind may cause the screen
to fall. All pieces of the frame and stand must be used together. The screen can be used separately.
To prevent unnecessary damage, the operating and maintenance of the screen should be done by adults.
Please fold up screen and return all parts into the case after every use.
Warnings
Ignoring the safety warnings may lea d to in juri es an d/or damaging the product.
Store back into transporting case after use
Avoid conditions such as wind and rain when used outside
Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer.
Product specifications are subject to change.
