7
6
Grange Machinery Ltd.
Sproatley Grange
Hull
HU11 4PT
M: 07918 515385
T: 01482 815711
E: rjones@grangemachinery.co.uk
W: www.grangemachinery.co.uk
Grange Machinery Ltd.
Sproatley Grange
Hull
HU11 4PT
M: 07918 515385
T: 01482 815711
E: rjones@grangemachinery.co.uk
W: www.grangemachinery.co.uk
CE DECLERATION OF CONFORMANCY
The equipment which accompanies this declaration is in conformity with EU Directive(s):-
2006/42/EC Machinery Directive
Manufacturer Name:
Grange Machinery Ltd
Manufacturer Address:
Sproatley Grange
Boggle Lane
Hull
HU11 4PT
Product:
3m Low Disturbance Toolbar (LDT)
Individual Serial Number:
Product Description:
Toolbar (6 leg) with ability to trail secondary
cultivation or seed drill equipment.
Date of Last Load Test Report:
N/A
Supplementary Information:
Manufacturing Standards Adhered to:
Standard of manufacturing
Authorised Signatory on Behalf of Manufacturer:
Name of Signatory:
Rhun Jones
Position in Company:
Director
Date of Issue:
1.3: Declaration of Conformity
The Grange 3m LDT is designed to high quality
engineering principles. However there are potential
hazards which the operator must be aware of during
use. The owner of the Grange 3m LDT equipment
is responsible for ensuring that all operators
familiarise themselves with the contents of the
manual before use.
Non-compliance with safety instructions can lead
to warranty claims becoming invalid. Grange
Machinery Ltd shall not be responsible for any
damage caused by the use of spare parts or
accessories and ancillary equipment not supplied or
approved by Grange Machinery Ltd
2.0 Safety considerations during the machines life cycle
3.0 Check your own working systems!
i. Ensure only qualified and experienced tractor operators are given permission to
use the Grange 3m LDT.
ii. Ensure the operator has the correct Personal Protective Equipment (PPE) when
working with the Grange 3m LDT. The recommendation is safety boots, close
fitting coveralls and wear required work gloves.
iii. Does the operator understand the principles of operation for the Grange 3m
LDT? For example, the 3 point linkage settings, depth control and replacement
parts such as shear bolts and points.
iv. Is the operator aware of the safe equipment configuration for the Grange 3m
LDT and 2nd stage cultivation/seeding systems when coupled to the tractor on
the public highway? Refer to section 11.0 in this manual.
v. Can the operator seek advice on operational parameters for the Grange 3m LDT
equipment from other persons when working remotely in the field?
vi. When performing any adjustments to the Grange 3m LDT and any 2nd stage
cultivation/seeding equipment, the tractor engine must be turned off, the key
removed and handbrake applied to prevent the hydraulics from operating.
