Page 4
The following symbols mean:
Caution!
Make sure you have fully read and understood the present operating
instructions before using the equipment. Please pay special attention to
sections marked by this symbol.
GENERAL SAFETY
Use only as specified in the operating instructions provided.
The unit should not be used if dropped or damaged.
The unit must be stored and transported only in an horizontal position (see marking on the
package).
After transportation or storage keep the unit under room temperature for 2–3 hrs before
connecting it to the electric circuit.
Use only cleaning and decontamination methods recommended by the manufacturer.
Do not make modifications in design of the unit.
ELECTRICAL SAFETY
Connect only to electric circuit with voltage corresponding to that on the serial number label.
Ensure that the electric circuit switch and the plug are easily accessible during use.
Disconnect the unit from the electric circuit before moving.
Disconnect the power cord plug from power socket to turn off the unit.
After moving the unit check the shaker control cable connections.
Do not plug the unit into an ungrounded the power socket, and do not use an ungrounded
extension lead.
If liquid penetrates into the unit, disconnect it from the electric circuit and have it checked by a
repair and maintenance technician.
1. Safety
ES-20
Operating instructions
Version 2.02 - July 2013
