background image

MSH-300i

Operating instructions

Page 

11

6.1. Temperature specification

The product is designed for operation indoors in a laboratory at altitudes up to 2000 m, with 
ambient  temperature  from  +4°C  to  +40°C  and  maximum  relative  humidity  80%  for 
temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C.

·

Plate temperature setting range ................................... +30°C ... +330°C

 (

increment 

·

Temp. setting range by external probe ..........................+20°C ... +150°C (increment 1°C)

·

Working plate heating till max...................................................................................11 min

6.2. General specification

·

Speed setting range ................................................100 - 1250 RPM (increment 10 RPM)

(max. speed depends on the magnetic element size, stirred volume, viscosity, glassware 

shape, etc.)

·

Maximal continuous stirring time ..................................................168 hours (7 day nights)

·

Max. stirring volume ......................................................................................................20 l

·

Operation with magnetic stirring elements of length  ....................................... 20 - 70 mm

·

Max.viscosity of stirring liquid ..........................................................................1170 mPa·s

·

Plate material .............................................................................................aluminium alloy

·

Working plate size .............................................................................................. Ø160 mm

·

Attachable stand SR-1 height ................................................................................320 mm

·

Dimensions ............................................................................................270x190x100 mm

·

Operating voltage / power consumption..............................230V; 50/60Hz / 550W (2.4 A)

or 120V; 50/60Hz / 550W (4.6 A)

·

Weight, not more .......................................................................................................3

.

3 kg

1°C)

6

. Specifications

Version 

2.1

 - 

October

 

20

12

Summary of Contents for Intelli-Stirrer MSH-300i

















Reviews: