www.GrapeSolar.com
Tel. 1
-
877
-
264
-
1014 (toll free), 1
-
541
-
349
-
9000
Document Version 20190316
©Copyright 2019, Grape Solar, Inc. All Rights Reserved
GS
-
1080
-
KIT PHOTOVOLTAIC
POWER GENERATION SYSTEM
QUICK CONNECT GUIDE Rev. 190316
3
Connect the bare wire end of the 6
-
in. Red/Black
MC4
-
to
-
Bare Wire Pair
’
s
red wire to the (+)
solar terminal of a Zenith
-
40 charge controller
.
Connect the bare wire end of the pair
’
s black
wire to the (
-
) solar terminal.
Repeat this process with the second Zenith
-
40
charge controller.
Connect the bare wire end of the 5
-
ft. Red/Black 10
AWG Cable Pair
’
s
red wire to the (+) battery ter-
minal of a Zenith
-
40 charge controller
. Connect
the bare wire end of the pair
’
s black wire to the (
-
)
battery terminal.
Repeat this process with the second Zenith
-
40
charge controller.
5
Mount the 180
-
watt solar panels
so that they are facing due South at approximately the same angle as your
latitude. The ideal area has full sun and no shading. If the following connections are made during daylight, cover
the panels with cardboard, cloth, or a similar opaque material so that the panel does not output power.
Use the instructions from the PowerHub
Installation Manual to attach the battery boxes to the inverter compo-
nent. The two battery boxes can store a maximum of 4 x 100+ Ah 12V sealed lead acid batteries (not included
with kit.) All batteries in the system must be identical in regards to make, model, and usage history. Follow all
precautions while installing batteries into the PowerHub battery boxes. Follow instructions to connect the large
Anderson connectors to the inverter port.
2
4
