6
GS
-
1080
-
KIT PHOTOVOLTAIC
POWER GENERATION SYSTEM
QUICK CONNECT GUIDE Rev. 190316
www.GrapeSolar.com
Tel. 1
-
877
-
264
-
1014 (toll free), 1
-
541
-
349
-
9000
Document Version 20190316
©Copyright 2019, Grape Solar, Inc. All Rights Reserved
IMPORTANT—
READ CAREFULLY: If the AC Indicator LED on the front of the PowerHub
is off (see picture
below,) it is safe to remove the top of the inverter. Remove the 5 Philips screws to detach the inverter lid.
Remove the upper
-
left punchout disc on the backside of the inverter.
With the inverter
lid removed, place the charge controller ring
-
lug cable
ends through the punchout hole.
For this system, these ring lugs must be connected to the
“
WIND
”
INPUT. (Do not connect the charge controller
cables to the solar input.) Screw both RED ring lugs onto the positive (+) wind terminal. Screw both BLACK ring
lugs onto the negative (
-
) wind terminal.
7
AC light
indicator
screws
punchout
disc
front
back
+
_
top
