6
GS
-
300
-
KIT PHOTOVOLTAIC
POWER GENERATION SYSTEM
QUICK CONNECT GUIDE Rev. 190316
www.GrapeSolar.com
Tel. 1
-
877
-
264
-
1014 (toll free), 1
-
541
-
349
-
9000
Document Version 20190316
©Copyright 2019, Grape Solar, Inc. All Rights Reserved
Connect each positive solar panel
cable to one of the
“
female
”
fuse
ends from the previous connections.
Connect the negative panel cables to the
“
male
”
branch
connector ends .
Attach the bare
-
wire ends of the MC4
-
to
-
Bare
Wire pair
to the charge controller
. The red
wire connects to the (+) input and the black wire
connects to the (
-
) input.
Remove the panel covering. In good sunlight, the
charge controller
’
s
”
BAT
%”
should increase to
100%. When the controller is set to
“
LOAD ON,
”
the system will provide power through the load
control output or through the USB port.
7
9
Connect the 15
-
ft MC4 cables
to the compatible
charge controller MC4 cables
.
8
