background image

 

2635 W. 7

th

 Place, Eugene, Oregon 97402, USA  

12  

Valid from February 2017 

 

 

 

www.grapesolar.com 

 

12 Tel: 1-877-264-1014 (toll free), 1-541-349-9000, Fax: 1-541-343-9000 

 

 

 

 

 

 

 

PHOTOVOLTAIC MODULES SAFETY 

 

AND INST

 

ALLATION MANUAL Rev. 

 

P

 

 

 

VALID IN NORTH AMERICA ONLY

 

 

 

 

 

 

 

4.

 

Do not remove the dirt by scraping or rubbing away from the module front surface when dry as this 
may cause micro-scratches on the glass and lead to module performance degrading.  

5.

 

Distilled water can be used for regular washing or rinsing of the module front glass to remove dust, 
dirt or other deposits.  

6.

 

To remove ingrained dirt, first rinse off area and let soak for a short period of time (~5 minutes). Re-
wet and use a soft sponge or seamless cloth to wipe glass surface in a circular motion. Mild detergent 
or glass cleaner may be used to clean the ingrained dirt, but harsh cleaning materials such as scouring 
powder, steel wool, scrapers, blades, or other sharp instruments must not be used to clean the module. 
Use of such materials will void the product warranty.  

7.

 

Always wear rubber gloves for electrical insulation while maintaining, washing or cleaning panels.  

 

 

V.

 

DISCLAIMER OF LIABILITY  

 

 

Since the use of this safety and installation manual and the conditions and methods of installation, operation, use and maintenance of the modules are not checked 
or monitored by Grape Solar Inc., Grape Solar assumes no liability for loss, damage, injury or expense arising through improper use or incorrect installation, 
operation or maintenance.  
  
Furthermore, Grape Solar assumes no responsibility for any infringement of patents or other rights of third parties that may result from use of the module. No 
license is granted by implication or otherwise under any patent or patent rights.  
  
The information in this Manual is based on Grape Solar’s knowledge and experience and is believed to be reliable; but such information including product 
specifications (without limitations) and suggestions do not constitute a warranty, expressed or implied. Grape Solar reserves the rights to make changes to the 
product, specifications or this Manual without prior notice.  

 

Exclusion for Documentation 

UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER 

A) 

MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY, OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION 

PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION; 

B) 

ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, INDIRECT, 

CONSEQUENTIAL OR INDIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION 
WILL BE ENTIRELY AT THE USER’S RISK; AND 

C) 

REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO 

MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH 
THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT WWW.GRAPESOLAR.COM/MANUALS.HTML

 

 

Summary of Contents for GS-M60-285-Fab1-US













Reviews: