19
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
POLISHER
59GP200
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
DETAILED SAFETY REGULATIONS
Safety instructions for safe use of polishers.
Common safety instructions on using abrasive paper, wire brushes and polishing
●
This power tool is designed for working with abrasive paper, wire brushes and for polishing.
Follow all safety guidelines, instructions, figures and data supplied with this power tool.
Failure
to observe the guidelines may cause electric shock, fire and/or serious body injury.
●
This power tool is not designed for grinding and cutting with grinding wheel.
Using the power
tool for purposes other than it is designed for may cause various risks and body injuries.
●
Do not use equipment not designed and not recommended by the manufacturer for use with
this power tool.
Possibility of accessory installation in the power tool alone does not guarantee safe
use.
●
Maximum permissible rotary speed of a working tool must not be lower than maximum rotary
speed specified for the power tool.
Working tool that exceeds permissible rotary speed may crack
and part of it may splinter.
●
Outer diameter and thickness of working tool must match to power tool dimensions.
Working
tools with incorrect dimensions may be insufficiently shielded or controlled.
●
Grinding wheels, pads, flanges, discs and other accessories must exactly match to spindle of the
power tool.
Working tools that do not match precisely to power tool spindle rotate unevenly, produce
hard vibrations and may cause loss of control over the power tool.
●
Do not use damaged working tools under any circumstances. Before each use check equipment,
e.g. grinding wheels for dents and cracks, grinding plates for cracks, abrasion or heavy wear,
wire brushes for loose or broken wires. In case of dropping power tool or working tool, make
sure it is not damaged or use other, undamaged tool. Once the working tool has been checked
and installed, switch on the power tool and let it work for one minute at maximum speed. Make
sure that operator and bystanders are beyond range of rotating tool.
Damaged tools mostly break
within such test time.
●
Wear personal protection equipment. Depending on the task, use protective mask that shields
whole face, goggles or safety glasses. When necessary use anti-dust mask, hearing protectors,
working gloves or special apron that protects against small particles of grinding and grinded
material.
Protect eyes against particles produced at work and floating in the air. Anti-dust mask
provides protection of respiratory tract and filters out dust produced at work. Prolonged exposure to
noise may lead to hearing loss.
●
Make sure to keep bystanders at safe distance from the power tool range. Each person close to
operating power tool must use personal protection equipment.
Splinters of processed piece or
cracked working tool can chip off and cause damage also beyond direct range.
●
Whenever tool can hit hidden electric wires or its own power cord during operation, hold it only
by insulated surfaces of the handle.
Contact with power supply line may transfer voltage to metal
parts of the power tool and cause electric shock.
●
Keep power cord away from rotating working tools.
Loss of control over the power tool can lead to
cutting or catching the power cord, also hand or whole arm can get into rotating work tool.
●
Never put away the power tool before working tool comes to complete stop.
Rotating tool can
contact the surface it is put on, which can cause loss of control over the power tool.
●
Do not carry the power tool when it is rotating.
Accidental contact of rotating working tool with
clothes may cause its catching and working tool penetration of the operator’s body.
●
Clean ventilation holes of the power tool on regular basis.
Motor fan sucks dust into casing and
Summary of Contents for 59GP200
