25
Polishing wheel diameter
180 mm
Buffing-polishing wheel diameter
125 mm
Spindle thread
M14
Protection class
II
Weight
2.6 kg
Year of production
2015
NOISE LEVEL AND VIBRATION PARAMETERS
Noise and vibration information
PParameters of produced noise level, such as sound pressure level Lp
A
and sound power level Lw
A
with
measurement uncertainty K are specified below in this manual, in accordance with EN 60745.
Vibration values a
h
and measurement uncertainty K are determined in accordance with EN 60745-2-3 and
specified below.
Vibration level specified below in this manual was measured in accordance with measurement procedure
defined in EN 60745 and can be used to compare power tools. It can also be used for initial assessment of
exposure to vibrations.
Specified vibration level is representative for main applications of the power tool. Vibration level may
change if the power tool is used for other purposes, with different working tools or will not be maintained
properly.
The abovementioned factors may lead to higher exposure to vibrations during whole working time.
To precisely define exposure to vibrations, include periods when the power tool is switched off and when
it is switched on but not used for working. This way total exposure to vibrations may be significantly lower.
Use additional safety measures to protect the user against results of vibration exposure, such as: power tool
and working tool maintenance, proper hand temperature conditions, good work organisation.
Sound pressure level Lp
A
= 71 dB(A) K = 3 dB(A)
Sound power level Lw
A
= 82 dB(A) K = 3 dB(A)
Vibration acceleration, polishing a
h
= 3,36 m/s
2
K = 1,5 m/s
2
ENVIRONMENTAL PROTECTION
Electrically powered products should not be disposed of with household wastes, but should be
utilised in proper recycling centres. Obtain information on waste recycling from your seller or
local authorities. Used electric and electronic equipment contains substances active in the natural
environment. Unrecycled equipment constitutes a potential risk for the environment and human
health.
* The right to make changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.
Summary of Contents for 59GP200
