APPENDIX
A-1
CH 2. CONNECTION AND PREPARATION
CH 4. CUTTING DATA SAVED ON SD CARD
CH 2. CONNECTION AND PREPARATION
CH 4. CUTTING DATA SAVED ON SD CARD
APPENDIX
Appendix A.
Standard Specifications
Item
CC300-20
CC330-20
Specification
Feeding method
Grit-rolling
Drive
Stepping motor
Cutting range
Maximum: 200 x 305 mm
(in expanded mode)
Maximum: 200 x 1000 mm
(in expanded mode)
Limited, however, to film media
only (0.1 mm or less in thickness,
liner-included thickness of 0.3 mm
or less)
Effective sheet width
Max. 270 mm
Note: Use of the carrier sheet is
necessary.
A4 size supported
Loadable sheet width: maximum
270 mm, minimum 210 mm
unless the carrier sheet is used
Operating speed
10 - 70 mm per second (in 10 mm
steps; 7 levels selectable)
10 - 80 mm per second (in 10 mm
steps; 10 levels selectable)
Mechanical step size
0.05 mm
Program step size
0.05 mm
Repetition accuracy
0.2 mm/300 mm
Loadable number of blades/pens
1
Tools
Blade with dedicated blade holder
General-purpose ballpoint pen (used only with the ballpoint pen
holder) (not supplied)
Media types that can be cut
Note: Use of the carrier sheet is
necessary for all types of media.
Kent paper (inkjet or laser paper
up to 157 g/m2), drawing paper,
postcards, scrapbooking paper;
inkjet photo paper
* Not all types of media can be cut
Film media 0.1 mm in thickness,
liner-included thickness
of 0.3 mm or less (but excluding
high-intensity reflective sheets),
Kent paper (inkjet or laser paper
up to 157 g/m2), drawing paper,
postcards, scrapbooking paper;
inkjet photo paper
* Not all types of media can be cut
Interface
USB 2.0 (Full speed)
Registration mark detection function Not available
Available
LCD
8 characters x 2 lines
SD card
Read only up to 2 GB (SDHC not supported)
Rated power supply
Dedicated adapter, +24 V DC (1.25 A)
Power consumption
12 W
Working environment
10 to 35°C, 35 to 75% R.H. (Non-condensing)
Guaranteed operating environment
16 to 32°C, 35 to 70% R.H. (Non-condensing)
External dimensions (W x D x H)
Approx. 420 mm x 140 mm x 112 mm (excluding protrusions)
Weight
Approx. 2 kg
