2-16
Setting up The Cutter Plotter
2.6
Mounting the Pen
Mount a pen in the pen station
CHECKPOINT
When mounting a pen for this cutting plotter, be sure to mount it at the pen station. To avoid injury, avoid touching
the pen immediately after the cutting plotter is turned on or whenever the pen is moving.
Open the holder arm of the pen station with your finger, then mount the pen in the pen holder.After
the pen is properly mounted, close the holder arm to secure the pen.
Holder arm
Be sure to fit into
the pen's groove
CHECKPOINT
Make sure that the pen's groove fits into the top section of the pen station's bracket.
