3-4
Setting of Step Movement Distance
The parameters when settng the cuttng drecton are determned by the dstance of the cuttng drecton.
Operation
Supplement
Perform the settngs n Normal menu.
1
Press the [PAUSE/MENU] key.
MENU screen s dsplayed.
2
Press the POSITION ( ) key (ADV).
ADV. settng screen (1/2) s dsplayed.
3
Press the [1] key (MOVE STEP).
MOVE STEP screen s dsplayed.
Supplement
Value chosen here wll be the movement
dstance for the step movement.
4
Press the [1] key (1.0mm) or the [2] key (0.1mm).
Supplement
It wll return to DEFAULT settng screen (1/2)
wthout changng the settngs when you press
the POSITION ( ) key (CANCEL).
5
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to DEFAULT settng screen (1/2).
6
Press the [PAUSE/MENU] key.
It wll return to default screen.
