manualshive.com logo in svg

GRAPHTEC Craft ROBO CC200, User Manual

The GRAPHTEC Craft ROBO CC200 is a versatile and compact cutting machine that allows you to create intricate designs with ease. Enhance your crafting experience with our comprehensive User Manual, available for free download from 88.208.23.73:8080, providing step-by-step instructions and valuable insights for maximizing the potential of your Craft ROBO CC200.

Share
Download
background image

3-18

CHAPTER 3. CRAFT ROBO CONTROLLER

PREFACE

PREFACE

CH 1. PRIOR TO USE

CH 1. PRIOR TO USE

CH 3. CRAFT ROBO CONTROLLER

CH 3. CRAFT ROBO CONTROLLER

INDEX

INDEX

CONTENTS

CONTENTS

CH 2. CONNECTION AND PREPARATION 

CH 2. CONNECTION AND PREPARATION 

Appendix A. Standard Specifications

Appendix A. Standard Specifications

3.6

Error Messages

If any of the following error messages is displayed on your computer screen, follow the instructions that have
been provided for each message.

The USB port is currently in use. Please wait ten seconds, and then try again.

→

Follow the instructions in the message.

Cannot communicate with the Craft ROBO. Check that the USB cable is connected
correctly, press the Craft ROBO's standby switch, and then confirm that its lamp is
lit (blue).

→

Follow the instructions in the message.

Craft ROBO communication error. Press the standby switch twice.

→

Follow the instructions in the message.

GITKUSBP.DLL could not be found, and so the Craft ROBO Controller could not be
started. Please reboot your computer or re-install the Craft ROBO Controller.

→

Follow the instructions in the message.
To install the software again, first uninstall the Craft ROBO Controller currently installed. If the
problem is not solved, download the latest version of the Craft ROBO Controller from the Craft
ROBO website and install it.

The GITKUSBP.DLL functions could not be found, and so the Craft ROBO Controller
could not be started. Please reboot your computer or re-install the Craft ROBO
Controller.

→

Follow the instructions in the message.
To install the software again, first uninstall the Craft ROBO Controller currently installed. If the
problem is not solved, download the latest version of the Craft ROBO Controller from the Craft
ROBO website and install it.

The value specified for the horizontal (vertical) distance between the registration
marks exceeds the specifiable range. Please specify a distance in the range X to X
mm.

→

Follow the instructions in the message.

The value specified for the feed direction exceeds the specifiable range. Please
specify a distance in the range of X to X %.

→

Follow the instructions in the message.

Registration mark reading failure. Please reload the medium.

→

Follow the instructions in the message.

Registration mark reading failed. Reload the media, and then click the [Cut] button
once again. If the registration marks are still not read correctly, deselect the "Search
Marks" check box, move the blade within the green square, and then click the "Read
Marks" button.

→

Follow the instructions in the message.

The Craft ROBO Controller is already active. Please shut the controller down and
perform the operation once again.

→

This message is displayed when you duplicate starting up the Craft ROBO Controller. Exit the
currently operating Craft ROBO Controller and restart it to continue operation.

Summary of Contents for Craft ROBO CC200













































Reviews:

No comments

Related manuals for Craft ROBO CC200

MIMAKI TPC-1000 Safety Precautions preview
TPC-1000
Brand: MIMAKI Pages: 20
HP DesignJet Z6610 60 Manual preview
DesignJet Z6610 60
Brand: HP Pages: 80
HP Designjet T1200 series Assembly Manual preview
Designjet T1200 series
Brand: HP Pages: 20
HP 7475a Operation And Interconnection Manual preview
7475a
Brand: HP Pages: 101
HP C4507A Quick Reference Manual preview
C4507A
Brand: HP Pages: 32
HP Designjet 8000s Series Installation Manual preview
Designjet 8000s Series
Brand: HP Pages: 193
HP C4694A User Manual preview
C4694A
Brand: HP Pages: 91
HP DesignJet 650C C2858B Setting Up preview
DesignJet 650C C2858B
Brand: HP Pages: 103
HP C4705A User Manual preview
C4705A
Brand: HP Pages: 222
HP 650c - DesignJet Color Inkjet Printer User Manual preview
650c - DesignJet Color Inkjet Printer
Brand: HP Pages: 199
HP 7585B Service Manual preview
7585B
Brand: HP Pages: 197
HP 7470A Service Manual preview
7470A
Brand: HP Pages: 141
HP DesignJet 200 Service Manual preview
DesignJet 200
Brand: HP Pages: 246
HP C2858A Service Manual preview
C2858A
Brand: HP Pages: 198
HP 7470A Interfacing And Programming Manual preview
7470A
Brand: HP Pages: 230
HP Designjet 230 Service Manual preview
Designjet 230
Brand: HP Pages: 268
HP DesignJet 2000CP Service Manual preview
DesignJet 2000CP
Brand: HP Pages: 332

Brands by name

Popular brands

Load more brands