5-26
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
Setting the Low Movement Speed
This setting determines the slower speed when one of the
[
] [
] [
] [
]
keys
is initially pressed, and
the length (distance) before faster movement begins.
(1) Press the
[PAUSE] key
to select PAUSE mode.
(2) Press the
[NEXT] key
repeatedly until the following menu is displayed.
FORCE
OFFSET
SPEED
QUALITY
OPTION1 OPTION2
(3) Press the
[F4] key
(OPTION2) to display the menu shown below.
FORCE
OFFSET
SPEED
QUALITY
POSITION OPT
MOVE SPD TEST
(4) Press the
[F3] key
(POSITION OPT) to display the menu shown below.
FORCE
OFFSET
SPEED
QUALITY
STEP HI SPEED
LOW SPEED LCD•
(5) Press the
[F2] key
(LOW SPEED) to display the low-speed setting screen.
FORCE
OFFSET
SPEED
QUALITY
LOW SPEED 2 cm/s
LENG 5 cm
Press
the
[F3] key
(LOW SPEED) to specify the speed for low-speed movement. Press the
[F4] key
(LENG) to
specify the length (distance) moved before the low-speed movement changes to high-speed movement begins.
Use the
[
]
or
[
]
key
to change the numeric value and then press the
[ENTER] key
to con
fi
rm your selections.
To cancel your selections, press the
[NEXT] key
.
Setting range: [LOW SPEED] 1 to 30 (cm/s) [Default value: 2]
[LENG] 0 to 30 (cm/s), MAX [Default value: 10]
If 0 was selected for the LENG parameter, the pen carriage starts moving at the high speed. If the
[NEXT] key
is
held down, however, the pen carriage moves at the low speed.
If MAX was selected for the LENG parameter, the pen carriage moves at the low speed without switching to the high
speed. If the
[NEXT] key
is pressed during pen carriage movement, however, the pen carriage switches to the high
speed.
(Default values: LOW-SPEED: 2 cm/s; LENG: 2 cm)
(6) Press the
[PAUSE] key
to cancel PAUSE mode.
This setting is retained in the plotter's internal memory even while the plotter is turned off.
Summary of Contents for CUTTING PRO FC2250 Series
Page 1: ...USER S MANUAL MANUAL NO FC2250 UM 151 FC2250 SERIES CUTTING PRO www delinit by...
Page 104: ...5 29 Chapter 5 FUNCTION SETTINGS AND OPERATIONS Cutting Plotting Conditions List...
Page 120: ...CHAPTER 8 SPECIFICATIONS PRODUCT SUMMARY 8 1 Main Specifications 8 2 External Dimensions...
Page 129: ...www delinit by...
