3-17
Chapter 3 PREPARATIONS FOR CUTTING/PLOTTING
(3) With the plotter in Ready status, press a key from
[F1]
to
[F4]
to select the COND No. for the creasing tool test.
Select either "CP001" or "CP002" as the cutter blade type.
(4) Use the
[
] [
] [
] [
]
keys
to move the pen carriage (the tip of the tool selected by the current setting)to the
starting position for the cutting test.
(5) Press the
[TEST] key
to display the creasing test selection screen.
FORCE
OFFSET
SPEED
QUALITY
TEST1 TEST2
SAMPLE BLADE ADJ.
(6) Press the
[F1] key
(TEST1) or
[F3] key
(TEST2) to crease a test pattern.
TEST1
: Press the
[F1] key
to crease a single test pattern.
TEST2
: Press the
[F3] key
to crease three test patterns (the
fi
rst pattern is creased with the speci
fi
ed creasing
force -1, the second pattern is creased with the speci
fi
ed creasing force, and the third pattern is creased
with the speci
fi
ed creasing force +1).
Appropriate
Excessive creasing force
Insufficient creasing force
Reduce the creasing force
(-1 to -5)
Increase the creasing force
(+1 to +5)
Check the creasing test patterns. If the pattern is only lightly creased, the creasing force is insuf
fi
cient. Conversely,
if the pattern is deeply creased or the medium is cut, the creasing force is excessive.
(7) Press the
[CONDITIONS] key
and adjust your settings.
(8) Repeat Steps (4) to (7) until you achieve the desired results.
(9) When the results are satisfactory, press the
[ENTER] key
or the
[NEXT] key
.
Cutting a sample
This test allows you to cut a sample to check the plotter’s operation.
(1) Load a medium for cutting the sample.
(2) Mount a cutter pen.
(3) With the plotter in Ready status, press a key from
[F1]
to
[F4]
to select the COND No. for the cutting test.
(4) Use the
[
] [
] [
] [
]
keys
to move the pen carriage (the tip of the tool selected by the current setting) to the
position for cutting the sample.
(5) Press the
[TEST] key
to display the cutting test selection screen.
FORCE
OFFSET
SPEED
QUALITY
TEST1 TEST2
SAMPLE BLADE ADJ.
(6) Press the
[F3] key
(SAMPLE) to display the sample data selection screen.
When GP-GL has been selected
When HP-GL has been selected
FORCE
OFFSET
SPEED
QUALITY
SELECT SAMPLE DATA
BALL
FORCE
OFFSET
SPEED
QUALITY
SELECT SAMPLE DATA
BOX
Summary of Contents for CUTTING PRO FC2250 Series
Page 1: ...USER S MANUAL MANUAL NO FC2250 UM 151 FC2250 SERIES CUTTING PRO www delinit by...
Page 104: ...5 29 Chapter 5 FUNCTION SETTINGS AND OPERATIONS Cutting Plotting Conditions List...
Page 120: ...CHAPTER 8 SPECIFICATIONS PRODUCT SUMMARY 8 1 Main Specifications 8 2 External Dimensions...
Page 129: ...www delinit by...
