4-20
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
If the value you input is exceedingly large (1.5 times or greater) or very small (0.5 times or less), or if the angle of tilt
with respect to the original axis tilt is 45° or greater, the following prompt is displayed. In this case, please re-input
the value.
FORCE
OFFSET
SPEED
QUALITY
DISTANCE ADJUSTMENT
ERROR. SET AGAIN!
(5) If 3-point or 4-point adjustment has been selected, the menu for adjusting the distance between points 1 and 3 will
be displayed. Make the settings in the same way as for the distance between points 1 and 2.
(6) When the distances between all the points have been adjusted, the following menu for setting the axis adjustment
origin is displayed. (This menu is not displayed when 4-point reading has been selected.)
FORCE
OFFSET
SPEED
QUALITY
AXIS ORIGIN POINT
X= 0 Y= 0
Use
the
[
] [
] [
] [
]
keys
to move the pen carriage (the tip of the tool or pen selected by the current setting)
to the position for setting the axis adjustment origin, and then press the
[ENTER] key
. If 2-axis adjustment has been
performed previously, the pen carriage will move automatically to the previously set reference point. In this case, use
the
[
] [
] [
] [
]
keys
to make any adjustments required.
(7) When all the adjustments have been completed, the plotter returns to Ready status.
Summary of Contents for CUTTING PRO FC2250 Series
Page 1: ...USER S MANUAL MANUAL NO FC2250 UM 151 FC2250 SERIES CUTTING PRO www delinit by...
Page 104: ...5 29 Chapter 5 FUNCTION SETTINGS AND OPERATIONS Cutting Plotting Conditions List...
Page 120: ...CHAPTER 8 SPECIFICATIONS PRODUCT SUMMARY 8 1 Main Specifications 8 2 External Dimensions...
Page 129: ...www delinit by...
