4-25
Chapter 4 REGISTRATION MARK SETTINGS AND DETECTION
4.14 Setting the Registration Mark Detection Start Position
This function sets the start position for registration mark detection.
(1) Select either AXIS or MARKS for the registration mark mode (see Section 4.2, "Setting the Registration Mark Mode".
(2) With the plotter in Ready status, press the
[ORIGIN] key
to display the following menu.
FORCE
OFFSET
SPEED
QUALITY
1 3
2 MANUAL
(3) Press the
[NEXT] key
to display the following menu.
FORCE
OFFSET
SPEED
QUALITY
MIRROR MARKS
START POS
(4) Press the
[F2] key
(START POS) to display the menu for setting the start position for the reading of registration
marks.
FORCE
OFFSET
SPEED
QUALITY
•SAVE POS ORG POS
CURRENT POS AUTO•
The currently selected setting is indicated by a black dot [
•
].
To save the current position and use it as the start position for the next registration mark detection operation, press
the
[F1] key
(SAVE POS).
To start registration mark detection from the current pen carriage position, press the
[F2] key
(CURRENT POS).
To start registration mark detection from the origin point, press the
[F3] key
(ORG POS).
If the
[F4] key
(AUTO) is pressed, the sensor performs detection while moving in a diagonal direction if the
fi
rst
registration mark (the registration mark at the lower left position) is not detected from the current start position.
When the displayed setting is satisfactory, press the
[ENTER] key
to con
fi
rm your selection.
Summary of Contents for CUTTING PRO FC2250 Series
Page 1: ...USER S MANUAL MANUAL NO FC2250 UM 151 FC2250 SERIES CUTTING PRO www delinit by...
Page 104: ...5 29 Chapter 5 FUNCTION SETTINGS AND OPERATIONS Cutting Plotting Conditions List...
Page 120: ...CHAPTER 8 SPECIFICATIONS PRODUCT SUMMARY 8 1 Main Specifications 8 2 External Dimensions...
Page 129: ...www delinit by...
