5-16
Chapter 5 FUNCTION SETTINGS AND OPERATIONS
5.15 Setting the Cutting/Plotting Area
The U.R. (Upper Right) and L.L. (Lower Left) functions are used to specify the effective cutting area of the
plotter so that any data specifying coordinate positions outside of the effective cutting area is disregarded.
The origin moves together with the new cutting area.
Current origin/Current L.L. Point
New effective cutting area's origin
New effective cutting area's L.L. Point
New effective cutting area's
U.R. Point
Y
X
Current U.R. Point
Current effective cutting area
Newly specified effective
cutting area
As soon as both the L.L. and U.R. points are set, the pen carriage moves to the new origin. To avoid injury, keep your
hands and other obstacles out of the vicinity of the pen carriage and Y bar.
(1) Press the
[PAUSE] key
to select PAUSE mode.
(2) Press the
[NEXT] key
repeatedly until the following menu is displayed.
FORCE
OFFSET
SPEED
QUALITY
I/F FUNCTION
TOOL COND AREA OPT
(3) Press the
[F4] key
(AREA OPT) to display the menu shown below.
FORCE
OFFSET
SPEED
QUALITY
ROTATE MIRROR
L.L. U.R. SCALE
(4) Press the
[F2] key
(L.L. U.R.) to display the screen for setting the L.L. point of the effective cutting area.
FORCE
OFFSET
SPEED
QUALITY
SET L.L. DEFAULT
X= 0 Y= 0
Use
the
[
] [
] [
] [
]
keys
to move the pen carriage (the tip of the tool selected by the current setting) to
the desired new L.L. point (origin) and then press the
[ENTER] key
. At such time, the X= and Y= coordinate values
respectively represent the current pen carriage position as X- and Y-axis displacements from the original origin.
To select the default L.L. point, press the
[F3] key
(DEFAULT). You do not need to press the
[ENTER] key
if the
default L.L. point was selected.
(5) When the effective cutting area's L.L. point has been speci
fi
ed, the screen for setting the U.R. point is displayed.
FORCE
OFFSET
SPEED
QUALITY
SET U.R. DEFAULT
X= 0 Y= 0
Summary of Contents for CUTTING PRO FC2250 Series
Page 1: ...USER S MANUAL MANUAL NO FC2250 UM 151 FC2250 SERIES CUTTING PRO www delinit by...
Page 104: ...5 29 Chapter 5 FUNCTION SETTINGS AND OPERATIONS Cutting Plotting Conditions List...
Page 120: ...CHAPTER 8 SPECIFICATIONS PRODUCT SUMMARY 8 1 Main Specifications 8 2 External Dimensions...
Page 129: ...www delinit by...
