Background Settings
♦
C5 - 3
LANGUAGE SELECTION
[ English ]
COMMAND ; AND :
ENABLED
\
\
DISABLED
“w” COMMAND
PEN UP
\
\
PEN DOWN
COMMAND ; AND :
ENABLED
\
\
DISABLED
Background Settings for GP-GL
LANGUAGE SELECTION
You may select one of the following 12 languages for the operation menu: Danish, Dutch, English,
French, German, Hungarian, Italian, Japanese, Norwegian, Portuguese, Spanish and Swedish.
Press the UP and DOWN ARROW keys to select the
desired language.
Press the ENTER key to register your setting and to
proceed to the next menu.
Press the NEXT key if you wish to bypass this setting
with no changes.
If you do not wish to make any changes on the background
settings, turn off the plotter.
“:” “;” Command Control (“:” “;” COMMAND)
When the GP-GL command mode is selected, set this function to enable or disable the
recognition of “:” and “;” commands set from the computer.
These commands may adversely affect the cutting results if the leading section of data is missing.
In such cases, set this function to DISABLED.
Press the F3 key to select ENABLED.
Press the F4 key to select DISABLED.
An asterisk appears beside your choice.
Press the ENTER key to register your setting and to
proceed to the next menu.
Press the NEXT key if you wish to bypass this setting
with no changes.
If you do not wish to make any changes on the background
settings, turn off the plotter.
Summary of Contents for Cutting Pro FC4100-100
Page 1: ...cutting pro FC4100 series series USER S MANUAL 1 a...
Page 138: ...Setting the Interface Functions C7 7 Input Output Circuitry Input Output Timing Chart...
Page 147: ...Specifications C8 6 FC4100 100 without Stand FC4100 100 with Stand Standard and Basket Option...
Page 148: ...Specifications C8 7 FC4100 130 without Stand FC4100 130 with Stand Standard and Basket Option...