FC7000-UM-251-9370
3-5
3. OPERATIONS
3.3 Description of Background Settings
The FC7000 is provided with the special functions listed below.
• Display Language Setting (LANGUAGE SELECTION)
This function sets the language used on the display. One of seven languages can be selected: English,
French, German, Italian, Portuguese, Spanish, or Japanese.
• Enabling/Disabling the “;” and “:” Commands (COMMAND ; and :)
Note: This function can only be specified when the COMMAND setting is GP-GL.
This function enables or disables the “;” and “:” commands when the COMMAND setting is GP-GL. If
the first part of the data is lost, these commands may be having an adverse effect. In this case, set this
function to DISABLED (the default setting is ENABLED).
• Moving the Pen While Raised or Lowered in Response to the “W” Command (“W” COMMAND)
Note: This function can only be specified when the COMMAND setting is GP-GL.
This function selects whether, upon receipt of the “W” command for the drawing of arcs, the plotter
moves the pen to the specified starting position in the raised status or in the pen status (raised or
lowered) that was in effect immediately prior to receipt of the “W” command.
When PEN DOWN is selected, the pen is moved to the starting position for the drawing of arcs in the
pen status (raised or lowered) that was in effect immediately prior to receipt of the “W” command. When
PEN UP is selected, the pen is moved to the starting position for the drawing of arcs in the raised status.
This setting is only effective if a cutter blade has been selected in the cutter-pen settings.
• Model ID Response (MODEL EMULATED)
Note: This function can only be specified when the COMMAND setting is HP-GL™.
This function sets the response to the “OI” command when the COMMAND setting is HP-GL™.
When 7550 is set, the “OI” command response is 7550.
When 7586 is set, the “OI” command response is 7586.
• Setting Priority (CONDITION PRIORITY)
This function sets whether the plotter places priority on the cutting conditions specified through command
input from the computer or through manual settings (on the plotter control panel).
When MANUAL is selected, cutting is performed using the cutting conditions set at the control panel,
and cutting conditions sent from the computer are ignored.
When PROGRAM is selected, the cutting conditions can be set either at the plotter’s control panel or by
command input from the computer. The most recent setting conditions are set. When the power is turned
off, only the conditions set at the control panel are retained in the plotter’s internal memory.
• Enabling/Disabling the Pen Select Command (PEN SELECT)
Note: This function can only be specified for a 2-pen model.
This function enables or disables the PEN SELECT command (“J” Command in GP-GL mode or the “SP”
command in HP-GL™ mode) for a 2-pen model.
Summary of Contents for FC7000-100
