FC9000-UM-251-9370 24
9 TROUBLESHOOTING
Error
code
Error Display
Cause
Solution
E04005
When this error was displayed
while scanning the horizontal
line of 3rd registration mark
when sheet media was loaded
with the ROLL 1 or ROLL 2.
The 3rd registration marks are
not printed in the scanning
area.
Print the 3rd registration mark to the
6 mm inside from the scanning area
(Cutting area).
There is not enough margin from
the horizontal line of 3rd registration
mark to the rear of media edge.
Load the media with the SHEET,
and then confirm it is able to feed
to 6 mm outside from the horizontal
line of 3rd registration mark.
When this error was displayed
while scanning the horizontal
line of 4th registration mark
when sheet media was loaded
with the ROLL 1 or ROLL 2.
The 2nd and 3rd registration
marks are not printed in the
scanning area.
Print the 2nd and 3rd registration
marks to the 6 mm inside from the
scanning area (Cutting area).
There is not enough margin from
the horizontal line of 2nd and 3rd
registration marks to the rear of
media edge.
Load the media with the SHEET,
and then confirm it is able to feed
to 6 mm outside from the horizontal
line of 2nd and 3rd registration
marks.
When this error was displayed
while scanning the horizontal
line of 4th registration mark.
There is printing object around
the 4th registration mark.
Do not print any printing object
around the 4th registration mark.
E04006
Amount of data has exceeded
the ARMS buffer size for the
registration mark.
Decrease the data.
E04007
Test pattern plotting position is
not within the plotting area for
sensor position adjustment.
Move the media toward center and
plot the test pattern.
E04009
This error is displayed when
the 2nd and the 3rd registration
marks of horizontal lines are
not in the scanning area when
the sheet media is loading.
Confirm the correct data is sending
to the plotter.
Print the 2nd and the 3rd registration
marks to the 6 mm inside from the
cutting area.
Summary of Contents for FC9000-100
