FC9000-UM-251-9370 1-1
1 INTRODUCTION
1 INTRODUCTION
CAUTION
DOUBLE POLE/NEUTRAL FUSING
1.1
Main Specifications
FC9000-75
FC9000-100
FC9000-140
FC9000-160
CPU
32-bit
Configuration
Grit-rolling plotter
Drive
Digital servo
Max. cutting area
(expanded mode)
762 mm x 50 m
1067
mm
x 50 m
1372 mm x 50 m
1626 mm x 50 m
Guaranteed precision cutting area
*1
742 mm x 15 m
1047 mm x
10
m
(
894 mm x
15
m)
1352 mm x
10
m
(
894 mm x
15
m)
1607
mm x
10
m
(
894 mm x
15
m)
Mountable media width
Min. 50 mm
Max. 9
20
mm
Min. 50 mm
Max. 12
24
mm
Min. 50 mm
Max. 15
29
mm
Min. 50 mm
Max. 1
850
mm
Number of push rollers
2
3
4
4
Max. cutting speed (Axial)
148.5cm/sec (45 degree direction)
105 cm/sec (Axis direction)
Specifiable speeds
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90, 100, 105 cm/sec
Max. cutting force
5.88N (600gf)
Min. character size
5
mm (0.197 in) alphanumeric Helvetica med. Font
Mechanical resolution
0.005mm
Programmable resolution
GP-GL: 0.1/0.05/0.025/0.01 mm, HP-GL
*2
: 0.025 mm
Repeatable accuracy
*1
Max. 0.1 mm/2-m unit (excluding media shrinkage)
Number of cutters/pens
1
Pen types
Water-based fiber-tip
pen, oil-based ballpoint
pen
Compatible media
Mono-vinyl chloride media, fluorescent media, and reflective media up to 0.25 mm
thick
(
Excluding the high reflective media)
Compatible paper for pouncing
Regular paper from 0.06 to 0.13 mm thick
Interfaces
USB2.0 (Full Speed)/Network (Ethernet 10BASE-T/100BASE-TX)/RS-232C
*3
(Auto switching)
Buffer memory
2 MB
Resident command sets
GP-GL/HP-GL
*2
(Control panel switching)
LCD Panel
Graphic type (240 x 128 dots)
Power supply
100-240VAC/50-60 Hz
Power consumption
140
VA max.
Operating environment
Temperature: +10˚C to +35˚C
Humidity: 35% to 75% (non-condensing)
Guaranteed accuracy environment
Temperature: +16 ˚C to +32 ˚C
Humidity: 35% to 70%(non-condensing)
External dimensions
(W x
D
x H)
including the basket and stand
1360 x 1151 x 1232 mm 1665 x 1151 x 1232 mm 1970 x 1150 x 1232 mm 2224 x 1150 x 1232 mm
Weight
49
kg
56
kg
64
kg
70
kg
*1 When the optional basket and Graphtec-specified media are used.
*2 HP-GL is a registered trademark of Hewlett-Packard Company.
*3 The RS-232C interface is option for the Japanese and Chinese model only.
Summary of Contents for FC9000-100
