GRAPHTEC FCX4000 SERIES, Setup Manual

FCX4000 

SERIES

CUTTING PLOTTER

SETUP MANUAL

MANUAL NO. FCX4000-UM-8M2

Preface

Thank you for choosing this product. Carefully keep this manual in a handy location for quick reference as necessity prior 

to use to ensure safe and correct use and also to thoroughly understand the functions and operate them effectively.

Prior to use

Be sure to read the attached "TO ENSURE SAFE AND CORRECT USE" prior to use. Otherwise, it may cause an 

unexpected accident or fire.

Notes on this Manual

(1)  No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any 

means, without the prior written permission of Graphtec Corporation.

(2)  The product specifications and other information in this manual are subject to change without notice.

(3)  While every effort has been made to provide complete and accurate information, please contact your sales 

representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish to make other 

comments or suggestions.

(4)  Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability for damages 

resulting from either the use of the information contained herein or the use of the product.

Registered Trademarks

All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or registered 

trademarks of their respective companies.

Copyright

This User's Manual is copyrighted by Graphtec Corporation.

Roles of each manual

•

 Setup Manual (this manual) .......Read it to understand method for connecting this Cutting Plotter with the PC, installing 

method for driver software, and to prepare for the operation.

•

 User's Manual (PDF data) ..........Read it to thoroughly understand the functions.

622659111