vi
Handling Precautions
Warning
Do not disassemble or modify the scanner.
• Such actions may result in a fire hazard or electric shock.
If the scanner makes an unusual noise, generates
smoke, overheats, emits a strange odor, or otherwise
functions abnormally, immediately turn off the power,
remove the plug from the power outlet, and either
contact the store where you purchased your scanner
or your nearest Graphtec representative.
• Use of the scanner in such a condition may result in a fire
hazard or electric shock.
Do not use flammable aerosols or similar products in
the vicinity of the scanner.
• The gas contained in the spray may cause a fire hazard or
electric shock if it comes into contact with the scanner’s internal
electrical components.
Before moving the scanner, make sure that the power
button is in the “off” position and that the power plug
has been removed from the power outlet.
• If the scanner is moved while it is still plugged into the power
outlet, the power cable may be damaged and cause a fire
hazard or electric shock.
If the scanner is damaged from being dropped or other
impact, turn off its power and remove the power plug
from the power outlet.
•Use of the scanner in such status may result in a fire hazard or
electric shock.
•Request repair by contacting the store where you purchased
your scanner or your nearest Graphtec representative.
•Never try to perform repair yourself. Repair work by
inexperienced personnel is extremely dangerous.
