background image

42

8920MUX Instruction Manual

Functional Description

 

Serial to Parallel Converter and EDH/EDA Error Processor

This circuit converts the serial data stream to the parallel data using the 
regenerated clock signal. Deserialized data passes through the EDH pro-
cessor. The EDH processor checks for a possible data or bit error in the 
incoming data. Any error is reported to an FPGA internal register.

27Mhz Phase Lock Loop (PLL)

From the incoming 27 MHz clock, the PLL generates an internal, locked 27 
MHz signal or produces an approximate 27 MHz free running clock in the 
event no input signal is detected. 

Field Programmable Gate Array (FPGA)

The FPGA contains 3 independent blocks:

Ancillary space manager

6.144 Mhz clock generator

CPU interface

The ancillary space manager allows the user to manipulate the embedded 
audio groups (G1 through G4). The User can delete or replace an existing 
audio group without damaging the SD video stream or other data types in 
the ancillary space.

The clock generator, using Direct Digital Synthesis (DDS), generates a 6.144 
MHz AES3 carrier clock from the incoming 27 Mhz.

The CPU interface provides connection between the board hardware and 
the CPU. From the FPGA, the CPU reads out current board status and 
writes back user commands to the hardware. 

Multiplexer (MUX) 

The MUX chip multiplexes the selected digital audio channels into the 
digital video stream. It supports 20- or 24-bit synchronous audio data with 
a 48 kHz sample rate. The MUX chip supports the generation and insertion 
of EDH information according to SMPTE RP 165.

Parallel to Serial Converter

The 8920MUX uses a standard 10-bit 270 Mbs Serializer. 

Summary of Contents for 8920MUX -



















































Reviews: