28
8960ENC Instruction Manual
Configuration
The
Manual
setting forces the module to operate in the mode chosen by
the user. If
Manual
is selected, the
Line Standard
control will appear and
allow selection of either
525
or
625
Figure 12. Standard Selection Web Page – Manual Mode
•
The Output Video Setup control appears only when a 525-line standard
is enabled, either manually or automatically. For output video with
54 mV of setup, select
Setup
. Select
No Setup
for Japanese NTSC or other
requirements with no setup.
When
Setup
(on) is selected for NTSC 525 format, all lines in the
full-field (FF) picture—which is composed of AP (active picture) and VI
(vertical interval)—have 54 mV setup added. The luma chroma gain is
reduced to provide a 1 V peak-to-peak nominal level. When
No Setup
(off) is selected, AP and VI have no setup, and luma chroma gain is
increased to provide a 1 V peak-to-peak nominal level.
When
Setup
is selected, setup can be selectively removed from lines 21,
22 or the vertical interval. When
No Setup
is selected, setup cannot be
added to any line.
Factory default provides setup on AP lines, no setup on VI lines, no
setup on line 21, and setup on line 22.
•
Select
NTSC
or
PAL-M
subcarrier format.
Manual Mode
Summary of Contents for 8960ENC -
