8960ENC Instruction Manual
25
Configuration
8960ENC Links and Web Pages
The 8900 web interface GUI provides the following links and web pages for
the 8960ENC module (
):
•
Status – reports input and reference signal status and module informa-
tion (
•
Standard Selection – provides controls for setting module line standard
and setting output video levels (
),
•
Levels – provides access to controls for adjusting luma, chroma, hue,
and black levels (
),
•
Timing – provides lock source and fine phase adjustments and hori-
zontal and vertical timing adjustments when the 8900FSS is installed
(
•
Video Processing – provides controls for enabling and disabling video
functions on the encoded output (
),
•
Recall Factory Defaults – use this web page to recall factory defaults for
the module (
•
Slot Config – provides a Locate Module function, Slot Identification
fields, Slot Memory controls, and SNMP Trap enables (
•
Software Update – provides information on updating software
(
Figure 9. 8960ENC Web Page Links
On all web pages, click on
Apply
to activate settings in each selection then
refresh the web page at the top of the page with the
Refresh
button (both
shown at left).
Refer to
for a complete summary of controls, defaults,
and parameter ranges.
Summary of Contents for 8960ENC -
