Chapter 2 - Basic Operations
19
1-4. LCD screen displays
ADVC3000 has three main screens and an error status screen. Turn the Select dial to switch between
the main screens and the error status screen. Pressing the MENU button displays the setting menu
screen.
Main screens 1 and 2
Main screens 1 and 2 differ from each other only in the right portion of the third line (Item 6, below).
This screen shows the current status of the operation.
• In the SDI/ANALOG
DV mode
1. Video Input
Displays the video source.
3. Audio Input
Displays the audio status.
5. Deck status
Displays the status of the deck.
4. Audio format
Displays input channel
and DV encode sampling
frequency.
2. Preset status
Displays the preset status
of video/audio input.
(Refer to page 33 for
details.)
Displays the remote
control connector in use.
8. 9-pin remote control
Displays the time code.
6. On the Main screen 1:
Input time code
Displays the number
designated by the user for
identifying each tape.
6. On the Main screen 2:
Users bit
Displays the audio input on each
monitor.
7. Audio monitor status
(Continued on the next page)
21
Summary of Contents for ADVC3000 -
Page 1: ...User Manual 3000 ...
